Gun A Nail everbuild

Gun A Nail

Solvent Free high strength gap filling panel adhesive for a wide variety of building applications

Product Description

EvERBUILD GUN A Nail is a ready to use gap filling and panel adhesive based on a high strength acrylic polymer. Adheres to most common surfaces inside the home. 

Benefits

·       Solvent free - environmentally friendly formulation

·       Excellent adhesion/bond strength - adheres to most common surfaces.

·       Exceptional early grab properties - usable in both vertical and horizontal positions.

·       High solids formulation - excellent gap filling properties without shrinkage.

·       Extended open time - allows for easy repositioning after fixing.

·       Will adhere to damp surfaces.

·       Water clean up - no hazardous solvents.

Code Product Boxed In
080004 Gun A Nail SF 1

Areas For Use

·       Bonding dado rails, architrave’s and skirting .

·       Fixing wall cladding direct to internal wall surfaces or timber battens.

·       Fixing battens directly onto walls without fastenings.

·       Bonding carpet gripper systems to most floors without the need for nails or tacks.

·       Bonding stair nosing to concrete or wooden stairs.

·       Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.

 

 

Limitations

·      Do not use in situations where both surfaces are non -porous (e.g. plastic/plastic -  metal/metal) - use GUN A NAIL EXTRA

·      Do not use as a mirror adhesive: use EVERBUILD MIRRORMATE

·      Caution : External use: The product will cure at a dramatically slower rate when used externally. For this reason, we recommend EVERBUILD GUN A NAIL EXTRA for external applications (solvent based product).

 

 

Surface Preparation

The surfaces to be glued should be clean and free from dust, grease and other contaminants. Wood, plaster and brick may be damp but not running wet. Use mechanical abrasion to clean porous surfaces if necessary before application.

 

 

 

Application

Apply GUN A NAIL to one side either in strips or daubs. Position the object to be fixed, then move from side to side and simultaneously apply pressure to achieve an even bond. If the object is wrongly positioned, slide it to the correct position. Finally, apply maximum pressure for a short time. (up to 1 minute) Wipe away any excess with a damp cloth making a neat joint between the two bonded surfaces. Temporary mechanical fixings may be required for heavy objects while full bond strength is reached.

 

 

 

Specific Data

Form

White thixotropic paste (ready to use)

Viscosity

~350,000 cPs @ 20°C (C3)  ~200,000 cPs @ 20°C (C2)

Coverage

2 x 310ml cartridges per m²

Solids

75-80%

Final Cure

24 -48 hours depending on substrates

Specific Gravity

1.45 – 1.50 g/cm3

Flash Point

None (solvent free)

Open Time

Max 10 mins at 23°C and 50% R.H

Application Temp

+4 to +35°C

Service Temp

-10 to +70°C

Compatibility

Can be used in contact with most building materials but should not be used against bituminous compounds or mirror backings.

Bond Strength

(Beech/beech)

i/ Lap Shear (4 days)

ii/ Double Stick*

 

 

1.7 – 1.8 N/mm²

1.43 – 1.7 N/mm²

* Bond made, then opened for 1 minute before re-bonding.

 

Health & Safety

Consult MSDS for full list of hazards.

 

 

Storage

Store in original unopened containers between 5 and 25oC

 

 

Shelf Life

24 months from date of manufacture.

 

File Download
Gun A Nail Standard V3.doc
Everbuild Gun A Nail Adhesive SDS v1.5.pdf