Fix247 Ltd - Fixings and Power Tools - Product Technical Information 500 Bath and Sanitary Silicone

Home About Products Special Offers Contact My Account Site Map

All Products

----------------------------------

Screws

----------------------------------

Screw / Site Cases

----------------------------------

Plugs

----------------------------------

Drill Bits

----------------------------------

Cable Clips

----------------------------------

Pipe Clips

----------------------------------

Lightweight Anchors

----------------------------------

Medium Duty Anchors

----------------------------------

Heavy Duty Anchors

----------------------------------

Cavity Anchors

----------------------------------

Chemical Anchors

----------------------------------

Self Drilling Screws

----------------------------------

Hole Saws

----------------------------------

Diamond Core Bits

----------------------------------

Diamond Discs

----------------------------------

Abrasive Discs

----------------------------------

Powder Actuated

----------------------------------

Gas Nailer

----------------------------------

Machine Consumables

----------------------------------

Expanding Foam

----------------------------------

Sealants / Adhesives

----------------------------------

Electrical Accessories

----------------------------------

Tape

----------------------------------

Personal Protection

----------------------------------

Carpet Protector

----------------------------------

Power Tools

----------------------------------

Catalogue

----------------------------------

500 Bath and Sanitary Silicone

Silicone 500 Sanitary is a acetoxy cure silicone that cures quickly to provide a permanently flexible, high strength waterproof seal. Specifically designed for sanitary applications, it contains a powerful fungicide to prevent mold growth and conforms fully to the requirements of BS5889, Type B

Technical Data

Movement accommodation	+ or - 25%
Skinning time	10 mins at 20'C
Cure time	3mm per 24 hours
Hardness Shore A	10 - 20
Shrinkage	< 5%
Service temperature resistance	-40'C to + 150'C
Application temperature resistance	+5'C to +30'C
Tensile strength	1.2 MPa
Stress	0.3 MPa at 100% elongation
Specific Gravity	1.04
Cleaning	Uncured sealant - white spirit; Cured sealant - Silicone Eater
Minimum joint width	5mm
Maximum joint width	25mm
Joint ratio	Max depth 50% of joint width
Coverage	@10 linear meters 9 x 9mm fillet joint
Elongation at break	500%

Application

Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45' with an opening slightly larger than the gap to be sealed. Apply by using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed.

Smooth down within 10 minutes of application. To ensure a roper bond, always smooth the sealant down using a spatula or piece of wood wetted with a soap and water solution. An improved appearance can be achieved by placing masking tape to both sides of the joint and removing with in 5 minutes of application.

Storage

Store in cool dry conditions between 5'C and 25'C.

Printable COSHH sheets for Silicone 500 Sanitary

Click Here or on the COSHH logo

Return

www.fmproducts.net plastic building products

Privacy Policy | Terms & Conditions

This website is owned by Fix 247 Ltd of Unit 1, Clyst Units, Cofton Road, Marsh Barton, Exeter EX2 8QW

Company Registration No. 06986857 VAT No. 977893533